GCC 표준 지도

1.1 This test method covers the determination of the flexural strength of hydraulic-cement mortars. 1.2 The values stated in SI units are to be regard…

1.1 This test method covers two procedures for an approximate determination of the presence of injurious organic impurities in fine aggregates that …

1.1 This test method covers obtaining, preparing, and testing cores drilled from concrete for length or compressive strength or splitting tensile str…

1.1 These test methods cover the physical testing of gypsum, gypsum plasters, and gypsum concrete. 1.2 The test methods appear in the following sectio…

1.1 These test methods cover the physical testing of gypsum panel products. 1.2 The test methods appear in the following order: Section Flexural Stren…

1.1 This practice covers three methods for the reduction of large samples of aggregate to the appropriate size for testing. These techniques are inten…

1.1 This test method furnishes a way of measuring, in the laboratory, the performance of a foaming chemical to be used in producing foam (air cells) f…

1.1 This specification covers precast concrete barriers, intended to be used adjacent to a roadway or as a median, to redirect vehicles unintentional…

1.1 This test method covers the testing of aggregates to estimate their soundness when subjected to weathering action in concrete or other application…

1.1 This specification covers packaged, dry, cementitious mortar or concrete materials for rapid repairs to hardened hydraulic-cement concrete pavemen…

1.1 This specification covers the basic requirement for colored and white pigments in powder form to be used as admixtures in concrete for the purpose…

1.1 This test method covers the determination of the distillation range of liquids boiling between 30 and 350 °C, that are chemically stable during t…

1.1 This test method covers measurement, in poises, of the apparent viscosity of lubricating greases in the temperature range from −54 °C to 38 °C (−6…

1.1 This standard is the compilation of all terminology developed by Committee D13 on Textiles. 1.1.1 This terminology, consists mostly of definitions…

1.1 This test method covers the determination of sulfur in petroleum products, including lubricating oils containing additives, additive concentrates,…

1.1 This test method covers the laboratory determination using a glass hydrometer in conjunction with a series of calculations, of the density, relati…

1.1 This test method covers the determination of hydrocarbon types of total aromatics, total olefins, and total saturates in petroleum fractions that…

1.1 This test method covers procedures for the determination of total sulfur in petroleum products including lubricating oils containing additives, a…

1.1 This test method covers determination of the changes in the consistency, as measured by cone penetration, of lubricating greases when worked in t…

1.1 These test methods cover the laboratory determination of the water (moisture) content by mass of soil, rock, and similar materials where the reduc…

1.1 These test methods cover the determination of the electrical conductivity of aviation and distillate fuels with and without a static dissipator ad…

1.1 This specification covers the selection of fuels for gas turbines, excepting gas turbines used in aircraft, for the guidance of interested parties…

1.1 This test method covers the determination of the boiling range distribution of petroleum products. The test method is applicable to petroleum prod…

1.1 This practice covers kinematic viscosity-temperature equations and charts (see Figs. 1-3), which are a convenient means to ascertain the kinematic…

1.1 This specification covers high-density cellular rubber adhered to carpet and rugs. This specification can also be applied to various substrates, s…

1.1 This specification covers “fiberglass” (glass fiberreinforced thermosetting-resin) manholes and wetwells fabricated with polyester, vinyl ester,…

1.1 This specification covers the fabrication and jobsite requirements for deformed and plain steel reinforcing bars with protective epoxy coating app…

1.1 This specification covers bearings, which consist of all elastomer or of alternate laminates of elastomer and steel, when the function of the bear…