GCC 표준 지도

This standard specifies the technical requirements for tow trucks equipment for light and heavy duty tow trucks.

This Saudi Standard specifies requirements, properties, performance and test methods for blow molded polyethylene tanks, with or without reinforcement…

This Standard covers plumbing waste fittings of sizes NPS-2 and smaller. 1.2 This Standard does not cover a) plumbing supply fittings, which are cover…

This Standard establishes physical, performance, and testing requirements applicable to the joint that connects a water closet to the sanitary drain p…

This Saudi standard is concerned with the general requirements for sanitary appliances are manufactured from Plastic and specifies requirements for ma…

This standard specifies the general requirements for deceased transport vehicles, whether vehicles specifically designed for this purpose or vehicles …

This standard specifies the technical requirements and markings for new replacement wheels designed for passenger cars (M1), multi-purpose vehicles, l…

This standard specifies the test methods for new replacement wheels designed for passenger cars (M1), multi-purpose vehicles, light trucks(N1) (includ…

This Standard is concerned with the fuel economy labeling requirements of all new incoming light duty vehicles (including Battery Electric Vehicle (BE…

This standard specifies requirements for thermoset fiber reinforced plastic signboards for permanent vertical road traffic signs. Not covered by this …

이 표준은 냉방 용량이 65000 Btu/h(19 kW) 이하인 덕트형 및 비덕트형 에어컨과 공랭식 히트 펌프의 성능 및 에너지효율 라벨 요구사항을 다룬다. 다음 기기는 이 표준의 적용범위에서 제외된다: a) 증발식 냉각기; b) 별도 사용용 응축기 유닛과 같이 완전한…

이 표준은 공장에서 제조된 가정용, 상업용 및 산업용, 전기 구동식, 기계식 압축 방식의 65000 BTU/h(19 kW) 초과 에어컨에 대한 에너지효율 라벨 및 최소 에너지 성능 기준(MEPS) 요구사항을 다룬다. 대상은 다음과 같다: - 공기 및 수냉식 응축기를 사…

This standard specifies trequirements for the locations, color, illuminations, identifications and operation of controls, tell-tales and indicators on…

개조 차량의 안전 요구사항

이 표준은 아랍에미리트에서 등록 및 라이선스 발급을 위해 수입되거나 제조된, 승객 및 수하물 운송용이며 중량이 3500 kg을 초과하지 않는 신규 경량 차량의 긴급 호출 기술 요구사항을 다룬다.

This standard specifies the technical requirements and test methods for devices that can be installed on school buses to maintain the safety of pedest…

This technical regulation specifies the requirements for the modification of passenger vehicles. This is applicable to used and new passengers vehicle…

This technical regulation specifies the requirements Small Series Production Vehicles (SSPV’s). This is applicable to build and/or imported vehicles, …

1.1 This standard specifies the technical requirements for the locations, color, illuminations, and identifications of road vehicle controls, tell-tal…

This standard specifies the technical requirements for the integrity of school buses fuel system by rear crash test using the moving barrier. This sta…

This standard specifies the performance requirements for school bus rollover protection.

This standard specifies requirements for the strength of the body panel joints in school bus bodies.

This standard specifies the technical requirements for windshield defrosting and defogging systems. This standard applies to passenger cars, multipurp…

This standard specifies the technical requirements for windshield wiping and washing systems. This standard applies to passenger cars, multipurpose pa…

This Standard covers pressurized flushing devices (PFDs) intended to flush water closets, urinals, and other plumbing fixtures and specifies requireme…

This International Standard sets forth the test procedures and performance requirements for a fallingobject protective structure, in the event such a…